BT Moto Front Lowering Kit with BT Caliper Brackets *FULL KIT* (FOR BREMBO HYPURE CALIPERS)

PLEASE NOTE: THIS KIT IS MADE FOR MOTORCYCLES EQUIPPED WITH BREMBO HYPURE CALIPERS ONLY. PLEASE CHECK COMPATIBILITY BELOW.

PLEASE PURCHASE THIS KIT IF YOU DO NOT NEED A HYPURE SPECIFIC KIT

MADE FOR THE 25+ DUCATI PANIGALE / STREETFIGHTER V4 AND 26+ APRILIA RSV4

Our BT Moto Front End Lowering Kit is a must have for straight line racers or those looking to get a little closer to the ground!

A safe and easy way to lower your center of gravity for quicker ET's. Integrated, positive locking back-up clamp plate guarantees slip-free operation with a user-friendly release. Extra heavy duty 1800 lb. abrasion-resistant webbing assures trouble free operation and long life.

Due to the new Brembo Hypure calipers, we had to redesign our kit to include a washer to push the strap mount away from the caliper. This will avoid any contact or gouging that may occur due to the shape of the caliper kit. We also had to include new, titanium caliper bolts with provisions for safety wire. The new bolts are longer than the OEM bolts and will work with OEM standard or Ohlins suspensions.

PLEASE NOTE: THIS WILL ONLY LOWER THE FRONT OF YOUR MOTORCYCLE. WE DO HAVE REAR LOWERING KITS FOR THE 26+ RSV4 AND 25+ V4 AND V4R AVAILABLE ON OUR WEBSITE

BENEFITS

• Tie down strap to temporarily lower front end.
• Remains on bike when not drag racing without disrupting handling.
• Helps eliminate wheelies for quicker ET’s.
• Preloads front suspension to prevent ‘hammer’ on launch.
• Easy installation with ‘stoplight’ adjustability.
• Allows motorcycle to be leveled to match rear lowering link setting
  
• Made in the USA

STRAP END KIT

• Installs on release end of strap to move buckle down to brake caliper area.
• Prevents damage to radiator from release buckle during non-strapped operation.
• Prevents buckle from obstructing full steering travel on some model bikes.
• CNC machined, corrosion-free nickel plated finish.
• Corrosion free stainless mounting hardware included.

RADIAL MOUNT STRAP BRACKET KIT

• Sold in sets of (2) brackets. One for each fork tube.
• CNC machined from billet 6061-T6 aluminum, titanium anodized with engraved logo.
• Corrosion free-stainless steel hardware included.
• Front end lowering strap with back-up clamp
• For use with Brembo Hypure Calipers ONLY
• (4) Titanium bolts with safety wire holes
• (4) Washers

COMPATIBILITY

• 25-26 Ducati Panigale V4 (All Models)
• 25-26 Ducati Streetfigher V4 (All Models)
• 2026 Aprilia RSV4 (All Models)

TRACK ONLY MODIFICATION