logo

2019+ BMW S1000RR/R/XR, M1000RR/R/XR Induction Kit (K66/K67)

$499.95 $579.00

2019+ BMW S1000RR/R/XR, M1000RR/R/XR Induction Kit (K66/K67)

$499.95 $579.00

Bundle And Save!

Quantity
SKU: BTM-ITK-KIT-K67

Description

BT MOTO INDUCTION KIT

For those looking to maximize the performance of their 2019+ BMW S1000RR/R/XR or M1000RR/R/XR, this is the perfect kit! Improving performance on the top end without losing bottom end performance is the key to this induction kit.

Bundling all the of the components we offer also saves you money! ALMOST 15% OFF BUYING THESE PARTS INDIVIDUALLY.


DETAILS ABOUT THE PARTS INCLUDED IN THIS KIT


WHAT DOES THIS KIT DO?

  • Relocates the Intake Air Temp (IAT) sensor.
  • Moves the IAT sensor from the factory location near the cylinder head to the front of the bike to get a true ambient reading.
  • A true ambient reading means more power but also means consistent power.
  • Noticeable improvements in stop-and-go traffic, starting a race from a stop and exiting the pit.
  • No downside and dyno proven gains across the powerband (see dyno chart below).
  • Removes factory airbox flappers to allow fresh air to enter the airbox at any speed, RPM or gear.
  • Even distribution of air to all cylinders without any cylinder bias.
  • More air to the engine with plastic flappers removed.
  • Maximizes airflow to the engine with custom velocity stacks
  • Adds performance air filter needed to maximize airflow with new performance parts

WHAT'S INCLUDED?

  • BT Moto IAT Kit
  • BT Moto Intake Flapper Delete Kit
  • BT Moto Velocity Stack Kit
  • DNA High Performance Air Filter

APPLICABLE MODELS

  • 2020-2023 BMW S1000RR (2019 EU spec)
  • 2021-2023 BMW M1000RR
  • 2023 BMW BMW M1000R
  • 2023 BMW M1000XR
  • 2020-2023 BMW S1000XR
  • 2021-2023 BMW S1000R

INSTALLATION VIDEOS AVAILABLE ON OUR RESOURCES PAGE



Affirm Financing

Dyno Testing

Dyno Testing

Below dyno applies to S1000RR, M1000RR, and M1000R/XR

Below is our custom flash with BT Moto induction kit versus stock and Stage 2 with no induction kit. You can see the bike gain power all the way through the RPM band and even resolve factory power dipping. Up top you can see a significant gain. All on pump gas 93. Same day testing on the same bike.

BLUE LINE - BT Moto Stage 2, 93 Pump Gas, Bolt-Ons

RED LINE - Factory Tuning, 93 Pump Gas, Bolt-Ons, BT MOTO INDUCTION KIT

M1000RR Dyno

Below dyno applies to S1000R / S1000XR

Below is our custom flash with BT Moto induction kit versus stock and with no induction kit. You can see Gains over the entire RPM range. Absolutely no loss in the bottom or mid-range with these stacks. Whether you're racing, or just a stop and go cruiser, these stacks will give you a noticeable pickup in power and overall ride quality. Up top you can see an even more significant gain than the mid range, and the power carries! All on pump gas 93. Same day testing on the same bike.

RED LINE - BT Moto Stack Tuning, 93 Pump Gas, Induction Kit 

BLUE LINE - Factory Tuning, 93 Pump Gas

S1000R S1000XR Dyno Stacks

**All in-house testing performed with 93 octane pump gas, unless otherwise stipulated. Different modifications and dynometers may make different power. Usage of a lower octane will yield smaller power gains. All power is measured from the wheel and not the crankshaft, whp (wheel horsepower) and wtq (wheel torque)**


Affirm Financing

Resources/Downloads

Resources Downloads

Compatibility

  • twitter
  • BMW M1000RR (23-24)
  • BMW M1000RR (21-22)
  • BMW S1000RR (23-24)
  • BMW S1000RR (20-22)
  • BMW M1000R (23-24)
  • BMW S1000R (21-24)
  • BMW S1000XR (20-24)
  • BMW M1000XR (23-24)

Documents

No Records Available

FAQ - Product Question

  • No and Yes.The BT Moto handheld tuner is VIN locked to the first motorcycle it flashes.This means any other motorcycle cannot use the handheld tuner. HOWEVER, should you decide to put the motorcycle back to the stock mapping, you're able to unpair it.The only way to use the BT Moto handheld tuner on another motorcycle is to unpair it from the first motorcycle.

  • 1) Plug the "My Genius" device into your computer

    2) Open our Flasher+/My Genius client software on your computer

    3) Click "Info" on our software

    4) On the bottom of that page it'll say last file written to ECU

    5) "Ori" means original (stock file)

    6) Mod files will be labeled and will correspond with what is shown in the "notes" section of each mod file drop down

  • The BT Moto handheld tuner stores multiple maps that you can change at any time. Unlike the mail-in ECU option, this means no downtime for your motorcycle while we do the flashing process. You can also go back to your stock mapping at any time you'd like and even read and clear engine faults. Additionally, some models will allow for DTC reading / clearing and maintenance light resets.

  • Yes, the end result is the same. Your motorcycle will now be flashed with our custom mapping, BUT with the BT Moto handheld tuner you're able to change maps for different fuels or go back to stock at anytime (along with many more features).

  • We recommend that you listen to your manufacturer's break-in procedures and do not flash until your motorcycle is fully "broken in". In the case with BMW this means waiting the 600 miles with limited RPM. We cannot circumvent the manufacturer's procedure. We are not able to remove factory enabled rev-limiters set in place at the dealer level and foregoing the first service will always result in warranty denial at the dealer level.

  • DO NOT FLASH YOUR MOTORCYCLE FOR THE FIRST TIME ON THE WEEKEND. Should an unforeseen error occur, no one will be able to help you until the following Monday. If it's your first time flashing with the handheld, please do it during the week while our technical support staff can help you if issues arise. Please do not start threads on Facebook or forums, please wait for our technical support to arrive back into the office and handle your situation.

  • Easy, you purchase the handheld, we ship it to you. Use the BT Moto handheld tuner to copy your motorcycles stock file (motorcycle will still run fine after this) then email that to

    BT Moto. We will then create a file from your stock mapping and email it back to you so you can upload it to the handheld. Once uploaded you'll be able to flash your motorcycle with the

    BT Moto handheld tuner.

  • No, this is not necessary. Assuming your motorcycle is running stock oxygen sensors the BT Moto flash will not need to be dyno calibrated.  If you're a person that needs to squeeze out every last bit of power (most will not need this), you can either bring the motorcycle to us for custom tuning with our flash or one of our partners, found on the partner's page of our website. If you're already running a Power Commander or some other piggyback fuel module that eliminates the stock oxygen sensors, you'll then need custom tuning on the fuel controller side.

  • Yes, you can go back to your stock mapping at any time you'd like and even read and clear engine faults and some models you can reset throttle and also maintenance lights.

  • This will depend on how fast you decide to ship to us and what you paid for shipping back. Shipping aside, once we receive your ECU expect us to have it back on the way to you within two business days.

  • If you have an aftermarket piggyback controller of any kind, you will be 100% responsible for your own setup and fuel adjustments after ECU mapping is installed to your motorcycle. Diagnostics and support is not available for third party, piggyback controllers.

  • Contact your dealer FIRST. This is the fastest way to get support. If your dealer has questions, they will contact us directly.

  • We ship UPS from Massachusetts. It is more expensive for international orders, but the product always arrives

  • ​Unfortunately due to each country and even some locations in the same country charging varying tariffs, we cannot tell you specific duties owed. We do ship most diagnostic tools with a $200 USD invoice, making the tax rate you are paying for on around $200 USD. ECU's are sent back with a "warranty return" invoice with them and a low value.

    • East Coast - 1 to 3 days
    • Midwest - 2 to 4 days
    • West Coast - 4 to 5 days

  • This depends on location. Most US orders will be around $30 USD or under for shipping standard sized items. International orders will be $120 USD and under for standard sized items. We are constantly working with UPS to get better rates and lower the pricing to many of our most popular international locations. As always you can consult with your local BT Moto dealer in regards to inventory to potentially help lower the shipping rate. Ordering in bulk can help better minimize shipping costs as well.

  • The BT Motohand held tuner stores multiple maps that you can change at any time. Unlike the mail-in ECU option, this means no downtime for your motorcycle while we do the flashing process. You can also go back to your stock mapping at any time you'd like and even read and clear engine faults. The mail-in is one map and you cannot change it unless you mail the ECU back in to BT Moto. Additionally, if the dealer were to ever issue an ECU update, with the handheld updates can be provided remotely while with a mail-in, you'd have to mail the ECU back in to get your old software back.

  • No you cannot. Due to issues with customers selling locked devices, improperly reset devices, broken devices and more, we no longer offer transfer of handheld devices outside of the original owner. If the original owner purchase another motorcycle and can provide proof of ownership, the device can be transferred to their new motorcycle, you would only have to pay for remapping.

  • No you cannot. The device is designed to be used on one VIN number. Once that one VIN number has been used it cannot be used on any other motorcycle. If you have 2 bikes in your garage and want to tune them both, both will need their own device and tuning package.

  • Anytime you take your motorcycle to the dealer they will first plug it into their diagnostic system to check for any software updates or recalls. If they see a software update available for your motorcycle, they will automatically update it without consulting you. This is a normal process followed by most dealers. Because of this update, the software version of your ECU is now different than the handheld and will result in an error message when trying to load your old tuned file. This means the handheld won't work with your motorcycle and it has to be reset to work again. If you go to the dealer, make sure you let them know not to update your motorcycle's software if you're flashed. Always always always make sure to put the original stock file on the motorcycle through our handheld tool BEFORE bringing it to the dealer.

    If the stock file was not used the device will be locked up. If it is a Flasher+ tool a $125 reset fee will reset the device and then $100 to remap it back to it's previous flash level. If it is a PowerGate3+ device, a new device will have to be purchased as there are no resets available for that device.

  • When shipping is paid for on the website it means shipping from us to you.  This charge has no bearing on how you decide to ship your ECU to us. That is entirely up to you but we do recommend UPS exclusively as they have an amazing success rate of package delivery for us.

  • Go to "Work" -> "Writing" -> "Original" in the handheld and then it'll load the original factory stock file to your motorcycle

  • If you have reached out to your dealer and have received no response in (2) business days, email us directly for support.

  • No we cannot.

  • We are on the east coast of the United States and open Monday-Friday from 10AM-5PM. Please keep this in mind when emailing us. We recommend you don't do any flashing of your motorcycle on the weekend because we aren't in the office to help you with your issues, should any occur.  If you email early in the day, we should get back to you that day, if not, the next. Officially we stick to a 48 hour window on replies but typically we are much faster. If you haven't heard from us within 48 hours, please bump the email thread as maybe it was missed. If it's before 48 hours, do not call or email as it will delay the process. Expect a longer response time if you email us on Friday night as we won't be back in the office until the following Monday.

  • Email us the issue and await a response. Will will get to your email as soon as possible. We work from bottom of emails to top, so by bumping your thread multiple times, you will effectively put yourself at the bottom of the queue. Please keep in mind our shop hours when awaiting a reply.

  • This is the brain to your motorcycle. It is fragile and should be shipped as such. Keep in mind the shipping company may be drop, throw or accidentally kick your package. This means get a larger box than the ECU and fill it with soft packing that can absorb any impacts or damage the box may sustain. If you don't know how to do this take your ECU to a shipping outlet and ask them to package the ECU securely. DO NOT SHIP YOUR ECU IN A PADDED ENVELOPE!

  • Usually just the ECU but some will require more items. Make sure to read the product details at the top and bottom to get a full understanding of what's needed for your flash along with the product order form you will be sent. Example: A 2017 S1000RR ECU mail-in requires ECU, Key, Ignition and Gauge cluster while a 2017 K1600 ECU mail-in requires just the ECU. Again, it's vital to read ALL of our notes and instructions on each product and the product order form you receive and follow accordingly. In addition to the ECU and potential other items, you will also need a paid invoice and product order form in the box.

Shipping

Weight:
2 lbs
Dimensions:
10x10x10 in

BT Moto currently ships directly through UPS. We offer domestic and international shipping.

We ship with UPS as it’s more reliable, has the least amount of shipping issues, and is continuously better than other shipping methods we’ve tried.

Shipping options will automatically display during the checkout process and depends on the size of your order, location etc.

For the majority of our products, the following shipping options through UPS are available.

ups
  • Ground (typically 3-7 business days)
  • 2-Day Air
  • Next Day Air
International Shipping rates are based on a Flat Fee Delivery. They are as follows :

Canada:

$70.00

Qatar, Denmark, Finland, Spain, Switzerland:

$90.00

Belgium, Germany:

$80.00

International Hong Kong, India, Indonesia, Israel, Japan, Korea South, Saudi Arabia, Taiwan, France, Ireland, Netherlands, Portugal, United Kingdom, Dominican Republic, Mexico, Australia, New Zealand :

$80.00

reviews

Add a review

5.0

1 reviews

Excellent product

This part allows the bike to get accurate & consistent temp readings. Which allows the bike to not pull timing and perform at peak performance.
16 March 2023 Cory Noel