(20-25) BMW S1000RR BT Moto 1" or 2" Lowering Link and Kit K67

USE OUR DROPDOWN MENU TO CUSTOMIZE YOUR ORDER. IF YOU LOWER YOUR BIKE USING OUR 2" LINK YOU WILL NEED A KICKSTAND AND DDC LINK (IF APPLICABLE). USE OUR VIDEO BELOW TO HELP YOU WITH INSTALL.

Introducing our 2020-2025 BMW S1000RR lowering link and kit! Our primary goal was to make a kit that was the best on the market and we think we did that - no compromises! This is the only link on the market designed around safety first using the most expensive and highest grade 7075-T6 billet aluminum and exact measurements we were able to make a lightweight, yet extremely strong OEM quality product that you can depend on. This product will lower your S1000RR 1 or 2 inches.

*PLEASE NOTE*

Our 2 inch link is primarily for stock wheel base bikes looking to maximize lowering their motorcycle, while the 1 inch link is primarily for extended swingarms, extension blocks, or someone wanting a comfortable, soft drop.

If using the 1 inch link, you do not have to cut and it's plug and play! OEM+ fitment

Our 1" kit DOES NOT require a kick stand OR CUTTING. You'll only need the lowering link and the DDC rod.

BENEFITS

• SHORTER RIDERS that have issues with getting their feet on the ground at stock height will really appreciate this kit.
• DRAG RACERS AND ROLL RACERS will enjoy lowering their center of gravity and reduce air from getting under the bike.
• AESTHETICS improved with an aggressive look and stance (see end of install video for before and after look of bike).
• MATERIAL used for this product is 7075-T6 high-grade and lightweight billet aluminum. Only one designed with this material in mind.
• NO CUTTING or kick stands needed for our 1" kits.

BALANCE

Usually with lowering people worry about upsetting balance or have a bike that feels lazy in a turn. We have developed a kit and process where the bike feels extremely balanced and can still take a turn. Our in-depth install video (see below) will break down the process for you and show you exactly how to achieve a perfect balance. Our kit doesn't make a stiffer ride. Your suspension will feel the same as stock, we are just making the bike a little lower.

WHAT YOU'LL NEED

We made this entire kit customizable. This means you can pick and choose what parts you want. We realize some will just want our link and provide the rest of the parts themselves. IF YOU DON'T HAVE ANY PARTS YOU'LL NEED to buy a kickstand (2" ONLY) and DDC link (if you have a DDC S1000RR). If you're roll racing or drag racing the bike you'll need to get the front strap kit and brackets. BE CAREFUL with strapping the front of the bike after lowering. It will make the oil pan very low. This increases the chances of it scraping on the ground. We recommend you only use this component if you're on a flat surface with no bumps. Otherwise we sell our low profile Billet Oil Pan Here​

OTHER NOTES

If lowering the bike for drag or roll racing, we recommend you soften the rear shock and stiffen the front. Have a professional do this if you don't know how. This will make the bike easier to race and make you faster. The front strap kit is helpful but NOT A MUST. We recommend only for drag or roll racing. 

SHOWN IN NATURAL FINISH*

​SHOWN WITH OPTIONAL CALIPER BRACKETS (SOLD SEPERATELY)*​

INSTALL AND WALK AROUND COMPARISONS

3-4 hours install time

2" KIT INSTALL AND COMPARISON. NO CUTTING IS REQUIRED WITH OUR 1" KIT.

1" WALK AROUND AND COMPARISON